| Width |
As required up to 60" (1600 mm) |
| Nominal Thickness |
5/8" (16mm) +/- 1/64" (0.5mm) |
| Extra Length for Joint |
6.5' (2m) |
| Min. Drum Diameters |
Head & Tail 24" (610mm) |
| |
Snub 12" (310mm) |
| |
Tension 16" (400mm) |
| Carcass |
5 ply, 350/5 piw, 600/kn/m (Polyester/Nylon) |
| Covers |
3/16" (4mm) top & bottom nominal thickness, high |
| |
proportion of natural rubber with additives to give |
| |
resistance to aging, abrasion, and hardness and |
| |
offers improved buffing properties. |
| Shore Hardness |
70 degrees shore "A" +/-5 degrees |
| |
Cover can be increased to 3/8" (5mm) top and back if required. |
| Tension in Service (Max) |
600kn/n (350 lbs/PIW) |
| Strength in Service |
Less than 1% at Max working tension |
| Breaking Strength |
600kn/m (3500 lbs/piw) |
| Elongation at Break |
3% minimum |
| Resistance to Temperature |
-13F to 176F (-25C to 80C) |
| Abrasion Resistance |
9" -190.6" to Din 53516 (230-270 mm to Din 53516) |
| Resistance to Oil & Grease |
None |
| Edge Details |
edges will be slit to required width |
| Belt Weight |
4.3 lbs sq. ft (21.75 kg/m2 nominal) |